throttle cable bracket

[andy]

Anyone have a pic of the bracket on the carb for the throttle cable. Im hooking up the cables from the dash and it seems there should be one,

Thanks,
Andy

[col.halftrack]

http://www.mcmaster.com/#96995a160/=rdd1fz
 try this link it was posted in this section in a thread about throttle return springs.

[andy]

Thanks, I need that too, but im looking for a pic of the bracket that holds the cable for the throttle cable from the dash to the carb.

[autocar925]

I just happen to be working on the carb so I got a pic.  I'll try to post from my computer tomorrow. Brkt is flat steel strip 3/4" wide with hole spacing 2 5/8. One hole for 1/4 bolt other 5/16 bolt. Carb end angled to contour around carb baseplate. Strip appears to be about .10 thick whatever gage that is(10?)

[BombFarm]

Although you can't see the back of the carb where the bracket mounts, at least you can see most of the bracket itself. I hope between autocar925's description and this picture you will get what you need.
*Picture from Tim Sutter's M2.

[autocar925]

Bracket

[andy]

Perfect guys a big thanks!
Andy