Special tool for slotted bolts?

[colkking]

Morning, gentlemen!
Yes, I know I can use a screwdriver to keep the slotted bolt from turning...BUT, has any of your smart guys fabricated something or know a better way to get some leverage on the bolt so it doesn't turn when you are loosening the nut?

Inquiring minds want to know!  :-)

Thanks,
KK

[8683jb]

KK - If you go to the forum under "Tips and Tricks", the second post down has info on this.
Jon

[vj]

 I got a slot socket fits  on a braker bar, its a 38 drive, but I use a 3/8 to 1/2 adapter for the longer braker bar. We done a lot of bolts with not problens. vj

[big44maghunter]

I have been using a screwdriver socket on my impact to remove bolts, just holding the nut.  Set is from Harbor freight and works great.  Around $10 and have only broken one so far.  Free replacement on that one though, can't beat it!

Brad

[yd328]

I use a KD tool 11/16" drag link socket p#721713, grind it to fit. The stubborn ones get heat to get them apart.

Gary

[steve-0]

I still have a few of these

http://halftrackinfo.com/index.php?topic=903.0