Author Topic: M2A1 5895  (Read 51018 times)

johne504

  • Jr. Member
  • **
  • Posts: 62
M2A1 5895
« on: February 08, 2015, 05:22:38 PM »
I found this track in a farmers junk yard about 3 weeks ago.  I can't believe they are still out there in this condition.. been sitting for 30-40 years, had a stuck valve in engine, tranny was rusted up, along with steering box.  but after working the valve loose, and replacing the tranny with a good used one, its back on the road now.  waiting for a bunch of parts to put her back together.  not going to do a frame off on this one, just make it a runner for now.  john

johne504

  • Jr. Member
  • **
  • Posts: 62
Re: M2A1 5895
« Reply #1 on: February 08, 2015, 05:30:10 PM »
a couple more pictures, cause I know you guys love photos, as I do!!!!

[attachment deleted by admin]

[attachment deleted by admin. sorry all images over 3000  kb where deleted automatically

woodwalker

  • Full Member
  • ***
  • Posts: 173
Re: M2A1 5895
« Reply #2 on: February 08, 2015, 06:14:18 PM »
Very nice find there.

Tapper02

  • Hero Member
  • *****
  • Posts: 638
Re: M2A1 5895
« Reply #3 on: February 08, 2015, 06:29:55 PM »
Wow John…that is amazing.  The rear floor is still there and it doesn't look too butchered.  Looks like the rancher did a good job of converting the roller to a winch without jacking up the roller brackets.  Your good fortune!

One other thing I find interesting is the stark difference in color between the outdoor pics and the indoor pics.  Outdoors it looks like it was painted yellow, but indoors it is OD again.

-Tom
1942 Diamond T M3 Halftrack
  (Being restored to an M3A1 configuration)
  Frame Number M31789
  Ordnance Number 3692
  Hood Number USA W403570-S
1944 Schelm Bros. M10 Ammunition Trailer
  Serial Number 16959
MVPA # 30507

johne504

  • Jr. Member
  • **
  • Posts: 62
Re: M2A1 5895
« Reply #4 on: February 08, 2015, 08:07:59 PM »
Tom, yes different colors are due to pressure washing all the oxidization off.  The farmer, or whoever took the rear armor off did a great job, actually took the time to remove all the bolts instead of cutting the angle piece off... and other parts.  I still can't believe it still has all the rear tailights, socket, bumpers, etc on it and in good shape... I have already dumped over 10k into it, but it will now have all the rear armor, tires, paint, transmission replaced, steering box replaced. I will post some more pictures in the upcoming weeks.  This track will probably be a record time motorpool resto the way its going...!!!! I have alread took it to the local gas station and put 8 miles on it.. after replacing the water pump, and radiator hoses, it now has coolant in it and does not leak any water.  I'm so excited I got it.  The farmer actually gave it to me for restoring this wc-21  (1/2 ton dodge open cab), that is actually in really good shape too....

yd328

  • Hero Member
  • *****
  • Posts: 736
Re: M2A1 5895
« Reply #5 on: February 08, 2015, 09:14:55 PM »
Very nice, keep the pics coming ;D

Gary

steve-0

  • Administrator
  • Hero Member
  • *****
  • Posts: 1387
Re: M2A1 5895
« Reply #6 on: February 09, 2015, 08:25:20 PM »
thats a great find!

steve1973

  • Hero Member
  • *****
  • Posts: 1424
Re: M2A1 5895
« Reply #7 on: February 10, 2015, 07:06:53 AM »
Wow, that's a nice track!! You will have that done in no time. You have all the hard to find stuff. All you need is a windshield frame. That can be tough unless someone has a spare laying around. Keep the photos coming.!!

Steve A.

johne504

  • Jr. Member
  • **
  • Posts: 62
Re: M2A1 5895
« Reply #8 on: February 11, 2015, 07:26:52 PM »
I am trying to save some money, for now I made my own roller, diameter is a little larger (12 3/4" od), but its hard to tell, still waiting on the the spring brace, but other than that I'm going to call it good, for now... got my new tires, and fuel tanks also, waiting for shop to press off old tires.

spec4don

  • Hero Member
  • *****
  • Posts: 981
Re: M2A1 5895
« Reply #9 on: February 11, 2015, 09:04:21 PM »
Alright John!

Don G.
1941 M2A1 not restored
1942 M3 Diamond T Mostly restored
1943 M3A1 Under restoration
1967 M51A2 Tractor
1945 WC 63 needs restoration
1967 M36 Long wheel base duece
1951 M135 GMC Fire truck conversion

emptyhead

  • Hero Member
  • *****
  • Posts: 657
Re: M2A1 5895
« Reply #10 on: February 14, 2015, 06:55:22 AM »
Nice find you are plugging along great.

johne504

  • Jr. Member
  • **
  • Posts: 62
Re: M2A1 5895
« Reply #11 on: February 14, 2015, 09:56:32 AM »
got new paint job yesterday, I am very pleased... waiting for more parts, and trying to find someone that can press off my old tires... progress.......

spec4don

  • Hero Member
  • *****
  • Posts: 981
Re: M2A1 5895
« Reply #12 on: February 14, 2015, 11:31:31 AM »
John, I took mine down to Les Schwab our local one does truck tires. Much better to let some 20 something tire break down the tire :P What size of tires do you have? Do you have 9.00-20's? or do you have the 8.25-20's? Do you have combat rims? The early halftracks had split rims. Your rocking on this half track! You'll be done in no time!

Don G.
« Last Edit: February 14, 2015, 11:34:50 AM by spec4don »
1941 M2A1 not restored
1942 M3 Diamond T Mostly restored
1943 M3A1 Under restoration
1967 M51A2 Tractor
1945 WC 63 needs restoration
1967 M36 Long wheel base duece
1951 M135 GMC Fire truck conversion

emptyhead

  • Hero Member
  • *****
  • Posts: 657
Re: M2A1 5895
« Reply #13 on: February 15, 2015, 06:17:38 AM »
I broke mine down myself. Broke one breaker bar getting he rim nuts off. Used a sawzall like steve showed and was able to get them off. Not an old mans job though.

johne504

  • Jr. Member
  • **
  • Posts: 62
Re: M2A1 5895
« Reply #14 on: February 15, 2015, 09:43:03 AM »
I still have the original combat rims with original tires from the 1940's, so, to say the least, they are going to be a bear to get off.  I went through this with my other halftrack years ago.  Les Schwab tires spent all day, and go nowhere..... I ended up taking them to a forklift tire shop and had them pressed off, but this company no longer has their press.  Using conventional methods on these rims/tires will not work, and I don't want to use a sawzall.  I believe a press will work if it is set up right, and large enough...I will keep trying to find a way to get them off this week....

 

SimplePortal 2.3.7 © 2008-2026, SimplePortal